Ethylene vinyl acetate (EVA) is the copolymer of vinyl acetate (VA) and Properties and applications of EVA will differ based upon the ratio. Ethylene vinyl acetate (EVA)/organoclay/compatibilizer nanocomposites were produced using a melt compounding technique in an internal. The melting and freezing points of various Elvax® ethylene vinyl acetate (EVA) When used in hot-melt adhesive formulations, the melting point predicts.


Author: Admin
Country: Serbia
Language: English
Genre: Education
Published: 21 April 2014
Pages: 511
PDF File Size: 28.6 Mb
ePub File Size: 10.77 Mb
ISBN: 775-8-64714-675-2
Downloads: 48483
Price: Free
Uploader: Admin


Decrease in molecular weight of polymer during processing can be the reason of increase in MFI or decrease in the melting viscosity. Possibly, stabilizers change alter the mechanism of interaction with ethylene vinyl acetate properties free formed radicals during destruction. Without using stabilizers radicals interact with defective areas in macromolecule of LDPE and sew them.

EVA Properties: Ethylene Vinyl Acetate Properties

At the same time, presence of Agidol 40 and Irgafos stabilize the polymer chain broken off during destruction. However, physical-mechanical properties of composites increase.

It indicates an increase of physical and chemical interactions between the phases of the polymer mixture. Thus, EVA containing less vinyl acetate groups 10—14 wt. Using the EVA type 1 reduces the surface roughness from nm to nm. AFM images of the surface of polymer composites: The ability of the polymer product can maintain ethylene vinyl acetate properties at elevated temperatures and is determined by heat resistance which characterizes the upper limit of operating temperatures.

Ethylene Vinyl Acetate

Figure 4 shows the TGA curves for the pure polymers and their ethylene vinyl acetate properties. The presence of stabilizers in the polymer blend composite leads to increase their thermal stability and reduce the degradation rate compared with the pure polymers.

As shown in Table 2introduction of PA-6 to 10 wt. Thus, EVA containing 10—14 wt. Photograph of LDPE a and polymer composition wt.

The studied ethylene vinyl acetate properties had signs of biological damage already in the initial stage of research, after 7 days Table 3. Blend, containing 10 wt. The control LDPE has no sign to biodegradation over the time of incubation. Assessment of biodeterioration of polymer blends for various incubation times where 0 point: The micrographs in Figure 6 ethylene vinyl acetate properties the change of the film surface of polymer composition after biodegradation for 28 days.

Ethylene Vinyl Acetate EVA

As can be seen in figure, it is the absence of PA-6 in consisting of blend on the surface after biodegradation, which may be associated with its consumption of microbes as source of nutrients. Micrographs of the film surface of polymer composite LDPE 80 wt.

As a result of biodegradation, the physical-mechanical properties of the samples decrease Table 4. It might be explained by the fact that the action of microorganisms tends to loosen the polymer structure.

Reduction in Mv directly demonstrates the ability of the polymer composite to degrade the conditions of biological aging. Some characteristics of polymeric compositions before and after biodegradation for 28 ethylene vinyl acetate properties.


Conclusion EVA containing 10—14 wt. The mixture of stabilizers of Agidol 40 and Irgafos changes alter the mechanism of interactions with the free formed radicals during destruction.

EVA Material: EVA Plastic, EVA Polymer & Molded EVA

As a result of that MFI and physical-mechanical properties of the polymer compositions enhance. As a result of biodegradation physical-mechanical properties of the samples and ethylene vinyl acetate properties molecular weight reduce.

The polymer does not biodegrade within the body, but is quite inert and causes little or no reaction following implantation.

  • Overview of materials for Ethylene Vinyl Acetate Copolymer (EVA), Molded/Extruded
  • Ethylene; vinyl acetate | C6H10O2 - PubChem
  • Properties and applications of EVA or Ethylene-vinyl Acetate.
  • British Plastics Federation
  • International Journal of Polymer Science
  • Navigation menu
  • There was a problem providing the content you requested

EVA is one of the materials popularly known as expanded rubber or foam rubber.

Related Post